Tiled Pool Construction
This indoor tiled pool measured 10m x 3.2m and had a flat bottom depth of 1.2m. We tiled the pool using porcelain tiles and created a dolphin motif on the floor of the pool. We also installed the pool equipment including a top of the range Sta Rite pump/Lacron Sand Filter combination and chemical feeder. To heat the pool the latest condensing gas boiler was installed which is 92% efficient and it is rated at approximately 80,000 BTU which will keep the water temperature at around 29ºC. A 6mm heat retention cover will keep the water from losing heat and a dehumidifier was installed to remove the hot air moisture. Click on the slideshow below to see how the tiled pool was constructed.